specification control drawing duraseal is a trademark of ty co electronics corporation. = tyco electronics corporation 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: duraseal fork terminal unless otherwise specified dimensions are in millimeters. [inches dimensions are shown in brackets] document no.: b-106-2xxx tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserv es the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev.: a date: 17-jul-06 drawn by: m. foronda cage code: 06090 replaces: d030370 dcr number: d060177 scale: ---- size: a sheet: 1 of 1 ? 2006 tyco electronics corporation. all rights reserved. if this document is printed it becomes unc ontrolled. check for the latest revision. product dimensions wire dimensions ?g product name ?a min b nom c nom l max color (1) size range mm 2 (awg) min max b-106-2401 4.0 [0.160] 4.3 [0.169] 8.0 [0.315] 32.0 [1.260] red 0.5 - 1.0 (awg 22-18) 1.4 [.055] 4.0 [.160] B-106-2402 4.6 [0.180] 4.3 [0.169] 8.0 [0.315] 35.0 [1.378] blue 1.5 - 2.5 (awg 16-14) 2.0 [.080] 4.6 [.180] b-106-2502 4.6 [0.180] 5.3 [0.207] 10.0 [0.394] 35.0 [1.378] blue 1.5 - 2.5 (awg 16-14) 2.0 [.080] 4.6 [.180] b-106-2403 6.5 [0.255] 4.3 [0.169] 8.0 [0.315] 38.0 [1.496] yellow 3.0 ? 6.0 (awg 12-10) 2.8 [.110] 6.5 [.255] b-106-2503 6.5 [0.255] 5.3 [0.207] 10.0 [0.394] 40.0 [1.575] yellow 3.0 ? 6.0 (awg 12-10) 2.8 [.110] 6.5 [.255] materials 1. insulation sleeve: heat-shrinkable, transparent color (1), radiation cross-linked modified polyamide with thermoplastic adhesive coating inside. 2. fork terminal: tin-plated copper alloy. base metal: c110 copper plating: tin-plated per astm b545, class a. application 1. these controlled crimp devices are desi gned to terminate a tin-plated or bare c opper stranded wire having an insulation rate d for at least 75 c to a fork terminal. it will provide a splash proof and strain relief connection. ul listed wire connection 91j4. 2. temperature range: -55 c to +125 c. 3. for application tooling and installation, see rpip-684-00. for best results, prepare the wire as shown:
|
